This article will take you through basic troubleshooting with your Dymo LabelWriter Barcode Printer
Basic Troubleshooting
Check the following:
- Have you connected the Dymo LabelWriter Printer to your computer?
If it fails to print a Windows Test Page then you will need to reinstall printer and driver
- Is the Dymo LabelWriter Printer plugged in and power turned on?
- Have you installed the correct Dymo Software? Please review our article - Dymo Software Required
- Label Feed Position - Have you loaded the labels correctly?
Use the guide on the printer to check if you have loaded them correctly - Example below:
- Make sure when loading the labels, you are not loading them with the label facing the wrong way
Yes - this is possible and we have had quite a few Dealerships do this
Font Size on Printed Label appears incorrect
Issue:
- User can print barcode labels from Blackpurl but the font of the printed information appears to be incorrect and/or the information is not sitting on the label correctly
- The printing is printing across multiple labels
Solution:
- A common issue with font size occurs is when the Dymo software is installed but not running
Verify that the Dymo software is running by ensuring that the relevant icon is in the task bar
Click onto the icon and ensure that the service is running
If it is running - you will get the option to Stop Service
- Check that you are using the recommended Labels:
- http://www.dymo.com/en-AU/lw-address-labels-large-1-4-10-in-x-3-1-2-in - This size will accommodate for two description lines
- https://www.dymo.com/en-AU/lw-address-labels-1-1-8-x-3-1-2 - This size will accommodate for one description line
- http://www.dymo.com/en-US/lw-address-labels-large-1-4-10-in-x-3-1-2-in - This size will accommodate for two description lines
- https://www.dymo.com/en-US/lw-address-labels-1-1-8-x-3-1-2 - This size will accommodate for one description line
- http://www.dymo.com/en-CA/lw-address-labels-large-1-4-10-in-x-3-1-2-in - This size will accommodate for two description lines
- https://www.dymo.com/en-CA/lw-address-labels-1-1-8-x-3-1-2 - This size will accommodate for one description line
Error Message - Dymo Framework Not Installed
Issue:
- When printing a barcode label, this message appears
in the top right hand side of Blackpurl
Solution:
- The Dymo Connect software is not running
We would also recommend that you also use the troubleshooting information contained in the User Guide for the Dymo LabelWriter Printer
If you need further assistance, please contact Blackpurl Support - support@blackpurl.com